Vesa Mount
Assembly
Instructions
Page 1
www.gazept.com
Vesa Mount Kit includes:
VESA Rods (2)
VESA Arms (2)
Black M4 Thumbscrews (6)
6-32 1/2" Washer Screws (4)
3M Adhesive Strips (4)
* Assembly requires #2 phillips screwdriver
We recommend that you first install the Gazepoint installer software
before mounting the eye tracker.
The VESA Mount allows you to mount a Gazepoint
eye tracker directly to your computer monitor.
You can either use the VESA mounting holes on the back of a
monitor or the 3M Adhesive strips (provided) to attach the bracket
to your monitor.
1
Attach VESA Arms to VESA Rods using 6/32 1/2" Washer Screws. These are
pre-threaded to the VESA Rods and will have to be removed. For 100mm VESA
Mount holes, ensure that the VESA Rods are oriented so that the lower bends are
away from the centerline and the VESA Arms bend towards
the centerline, as shown in the diagram.
6-32 1/2" Washer Screws
Gazepoint Research Inc.
418 – 2912 West Broadway
Vancouver B.C.
V6K 0E9 Canada
T +1
408 883 4293 (GAZE)
E
W
www.gazept.com
