Gazelle Shimano Steps, Quick Start Manual, Page: 54 / 88

2.3 Display
2.3.1 Display E6100 en E7000
Your bike can be equipped with automatic
and manual shifting.
If you shift manually, the switch is located on
the right-hand side of the handlebar.
Electronic shifting
Bikes equipped with the Di2 system have
an electronic shift capability. The control
is positioned on the right-hand side of the
handlebar.
Basic status display
Displays the status of your bicycle and
travel data.
The gear position is only displayed when
using electronic gear shifting.
(A) Battery level indicator
(B) Maintenance alert
I
ndicates that maintenance is required.
Contact your place of purchase or a bicycle
dealer if this icon is displayed.
(C) Gear position display
<SC-E6100>
Current gear position
Start mode gear position*1
Shifting advice*2
This notifies you of the recommended timing at
which to shift based on the bicycle riding conditions.
(D) Travel data display
(E) Gear shifting mode*1*3
Displays current gear shifting mode as [Auto] or [Manual].
(F) Assist gauge
Displays assistance level.
(G) Current assist mode
31
„
Basic status display
Displays the status of your bicycle and travel data.
The gear position is only displayed when using electronic gear shifting.
(A)
Battery level indicator
(B)
Maintenance alert
Indicates that maintenance is required. Contact
your place of purchase or a bicycle dealer if this
icon is displayed.
(C)
Gear position display
< SC-E6100 >
Current gear position
Start mode gear position*1
Shifting advice*2
This notifies you of the recommended timing
at which to shift based on the bicycle riding
conditions.
(D)
Travel data display
(E)
Gear shifting mode*1*3
Displays current gear shifting mode as [Auto] or
[Manual].
(F)
Assist gauge
Displays assistance level.
(G)
Current assist mode
(H)
Current speed*4
(I)
Current time
(J)
Light icon
Indicates that the light connected to the drive unit
is lit.
(K)
Bluetooth ® LE icon
Displayed when connected over Bluetooth LE.
*1
Only for electronic gear shifting with internal
geared hub.
*2
Only for electronic gear shifting with the gear
shifting mode set to [Manual].
*3
[Manual] will always be displayed for rear
derailleur models.
*4
For SC-E7000, the traveling data displayed in this
location can be changed.
< SC-E6100 >
(I)
(H)
(A)
(J) (K)
(C)
(D)
(G)
(F)
(E)
(B)
< SC-E7000 >
(A) (C) (E) (B) (K)
(G) (H)/(D)
54