Gazelle Easyflow HMS, User Manual

Page: 107 / 480

Gazelle Easyflow HMS Manual | 39
Using the bike
Resetting
DST
Setting the
DST
-to zero is done as follows:
1. Ensure that you select
DST
.
2. Press on the cycling data button
47
until the
DST
-value
starts flashing.
3. Press again on the cycling data button
47
.
The value will now go to zero.
Speed display (
KM
/
H
-
MPH
)
You cannot change the unit for speed yourself. Consult a
Gazelle service specialist.
Maintenance indication
If the maintenance symbol appears on the display,
maintenance is necessary. Make an appointment with a Gazelle
service specialist.
Warning indication/Error indication
When a W-code or an E-code
appears in the cycling data
field, consult chapter
’Troubleshooting and repairs’
(page 54).
3.9 Luggage carrier
•
It is recommended to use bicycle bags on both sides of
your bicycle in order to create a good balance.
Your
Gazelle service specialist has a wide range.
•
Children may not be transported without a child seat.
•
A child seat can be mounted on the luggage carrier.
•
Only use accessories after consulting your Gazelle service
specialist. Damage can be caused by parts that do not fit
properly.
•
When mounting accessories (such as a child seat) always
follow the instructions of the relevant supplier.
•
Ensure that loose parts cannot end up near moving parts
(such as the rear wheel).
•
Ensure that accessories on the handlebar do not snag the
wires/cables.
•
Never attach a handlebar basket or carrier to an aluminium
handlebar.
53
"
DANGER
" For mounting a child seat, always
consult your Gazelle service specialist and take
the conditions and maximum load of the carrier
into consideration.
"
DANGER
" Do not carry out any modifications to
the carrier or to how it is mounted.