5
7.1
Installation preparations
Warning! When mounting, attach the fixture to something that can support its entire weight.
Avertissement! Lors du montage, fixez le dispositif à une structure pouvant supporter tout son poids.
•
Switch off mains power.
•
Install the wire hanging bracket (C).
•
Install the Sun Grip
®
light hangers (B).
•
Distribute the fixture weight evenly so fixture hangs level (fig. 3). Sun Grip light hangers allow the LED fixture to easily move
upward and downward (fig. 4) according to your crop height (fig. 5).
•
Make sure power cords:
1) Are not concealed or extended through a wall, floor, ceiling, or other parts of building structures.
2) Are not located above a suspended ceiling or dropped ceiling.
3) Are not permanently affixed to the building structure.
4) Are routed so that they are not subject to strain and are protected from physical damage.
5) Are visible over their entire length.
6) Are routed so that they do not contact any LED rails.
7) Are used within their rated ampacity as determined for the maximum temperature of the installed environment
specified in the instructions.
7.2
Installing the LED fixture
•
Attach the LED fixture to the mounting system.
•
If you plan to use the LED fixture as a stand-alone fixture, skip to section 7.7.
•
If you plan to use a Master Controller, connect the e-Series adapter to the LED fixture (fig. 6) and skip to section 7.3.
640W
60 cm
23 in
750W
0.75 m -
30 in
3.
4.
6.
5.
345 W
