Page 1 of 2
OR
2015-2018 Ford Edge
Mud Flap Set, Rear
Mounting Diagram & Instructions
GCR43R
766627 / 766538 / 766633/ 766639
IMPORTANT:
Manufacturer is not responsible for negligent use of vehicle with mud flaps installed, including
over-tightening of screws and bolts causing damage to vehicle or mud flaps
.
TOOLS REQUIRED-
Electric or re-chargeable
¼” Drill Bit
Socket or Open Wrench
Phillips Screw Driver
Drill
FLAPS
(1)Flap Assembly,
(1)Flap Assembly
Front, DS
Front, PS
Part #766543
Part #766544
PARTS BAG # 766550
a) (2) Screw, Machine
b) (8) Washer, Flat
c) (2) Washer, Lock
d) (2) Nut, Hex
SS, #18-8, 10-24 x 1” Hex
0.203” x 1” 18g SS
18-8SS, 10 Helicoil
SS, #10-24
Part #012022
Part #018031
Part #024001
Part #025003
INSTALLATION
(For ease of installation it is suggested that the wheel be removed)
1.
Before you install your Mud Flap Set, see the diagram and parts list for all necessary parts. Start on the driver’s
side.
2. Remove the factory screws on the inner fender.
3. Loosely install the mud flap through holes #1 & #2 into the factory holes #4 & #5 using (2) factory screws and (2)
stainless steel washers. (See Diagram)
May 13, 2020
