74 Maintaining and Troubleshooting Your Solo Notebook
Advanced menu
Press the <Esc> key to access the Exit menu and accept or discard changes. Press
<F9> to return to the factory defaults, or <No> to return to the previous settings.
Use the right arrow key to move over to the next menu.
Security menu
The Security menu primarily lets you set passwords, either Supervisor or user, that
limit access to your BIOS setup and thus protect your system.
1.
Start your notebook.
2.
Press the <F2> key when prompted to do so. The “Entering Setup...”
message briefly shows and then the Main menu appears.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specif ic Help
Setup Warning
Setting items on this menu to
incorrect values may cause your
system to malfunction
Plug & Play O/S:
USB Keyboard
>PCI Configuration
>I/O Device Configuration
Local Bus IDE adapter:
Large Disk Access Mode:
>Audio Options Menu
[Yes]
[Disabled]
[Enabled]
[Both]
[DOS]
Select ‘Yes’ if you are
using a Plug & Play
capable operating system.
Select ‘No’ if you need
the BIOS to configure
non-boot devices.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Default
ESC Exits
←→
Select Menu Enter Select > Sub-Menu F10 Save and Exit
To access the Setup menus
Caution!
Setting items on this menu to
incorrect values may cause
your system to malfunction.
Note:
The Setup menu screen shown
may differ somewhat from
that shown here. If there are
differences, follow the on-
screen instructions and helps.
