Gateway Solo 5100 Maintaining & Troubleshooting Download Page 53

Page: 53 / 96

52 Maintaining and Troubleshooting Your Solo Notebook

The next window displays the IntelliPoint identification number. Copy this
number down for future product support reference. Click

Next

Keep the default installation directory. Click

Next

Click

Finish

to start copying driver files.

Click

Close

to exit the setup program.

Click

Restart Windows

to complete the driver installation. If you are

reinstalling the Windows NT operating system and need to install additional
drivers, you can click

Return to Windows

and continue installing the other

drivers before restarting.

Windows NT Intel BusMaster IDE drivers

Use the following instructions to install the Windows NT Intel BusMaster IDE
drivers. If the Solo System CD shipped with your system, you may use it to install
the driver instead of installing the drivers from diskette.

If the floppy drive module is not already installed, shut down the system and
install the floppy drive. Restart Windows.

Insert the Solo 5100 Windows NT Intel BusMaster IDE diskette into the
floppy drive.

Click

Start

Run,

and on the command line type:

a:\setup

then click

PIIX IDE Bus Master Driver File Installation Setup window appears. Click

Yes

to continue the installation.

Click

Yes

if you agree to the license agreement.

The default installation location appears. Click

to continue.

Click

Yes

to view the README.TXT file which supplies further installation

instructions. Close the file and continue with the instruction in this
procedure.

Click

Start

Settings

Control Panel

. Double-click

SCSI Adapters

icon.

Installing the Solo 5100 Intel BusMaster IDE drivers

Summary of Contents for Solo 5100

































































































Search results

Summary of Contents for Solo 5100

Reviews:

Related manuals for Solo 5100

Brands by name

Popular brands

Gateway Solo 5100, Maintaining & Troubleshooting

Search results

Summary of Contents for Solo 5100

Reviews:

Related manuals for Solo 5100

Brands by name

Popular brands