Chapter 4: Installing Drivers and Related Software 41
Enabling USB ports
Your Gateway computer shipped with the USB ports enabled. However, if for some
reason you have to reload Windows, use the following instructions to reload the
USB driver supplement.
In addition, if you are adding a new USB device, you must load the USB device
driver according to the device manufacturer's instructions. If the Solo System CD
shipped with your system, you may use it to install the driver instead of installing
the drivers from diskette.
1.
If not already installed, shut down and install the floppy drive module. Restart
Windows.
2.
Click
Start
,
Settings
,
Control Panel
. Double-click
System
icon and select the
Device Manager
tab.
3.
Under
Device Manager
tab click
+
next to
Other Devices
. You will see
?PCI
Universal Serial Bus
in the list.
Locating and removing the Unknown Devices
4.
Click
?PCI Universal Serial Bus
and click
Remove
.
Enabling the USB ports for Windows 95