Gateway MX8711 - Pentium Dual Core 1.6 GHz Reference Manual Download Page 36

Page: 36 / 148

CHAPTER

: Setting Up and Getting Started

Select an
object on the
screen.

Position the
pointer over the
object. Quickly
press and release
the left button
once. This action
is called

clicking

Start a
program or
open a file or
folder.

Position the
pointer over the
object. Press the
left button twice
in rapid
succession. This
action is called

double-clicking

Access a
shortcut
menu or find
more
information
about an
object on the
screen.

Position the
pointer over the
object. Quickly
press and release
the right button
once. This action
is called

right-clicking

Move an
object on the
screen.

Position the
pointer over the
object. Press the
left button and
hold it down,
then use the
touchpad to
move (drag) the
object to the
appropriate part
of the screen.
Release the
button to drop
the object where
you want it.

To...

Do this...

Summary of Contents for MX8711 - Pentium Dual Core 1.6 GHz





















































































































































Search results

Summary of Contents for MX8711 - Pentium Dual Core 1.6 GHz

Reviews:

Related manuals for MX8711 - Pentium Dual Core 1.6 GHz

Brands by name

Popular brands

Gateway MX8711 - Pentium Dual Core 1.6 GHz, Reference Manual

Search results

Summary of Contents for MX8711 - Pentium Dual Core 1.6 GHz

Reviews:

Related manuals for MX8711 - Pentium Dual Core 1.6 GHz

Brands by name

Popular brands