Gateway MX6708 Hardware Reference Manual Download Page 28

Page: 28 / 72

CHAPTER 2: Checking Out Your Gateway Notebook

www.gateway.com

Replacing the EZ Point pointing device cap

The cap on the pointing device is removable. If the cap becomes worn or
damaged, remove the cap from the stick and replace it with one of the spares
included with your notebook. If you need to purchase additional caps, visit the
Accessory Store at

accessories.gateway.com

Turning the touchpad or pointing device on or off

Tips & Tricks

Both the touchpad and pointing device

can be turned on at the same time.

You can turn the touchpad and optional pointing device on or off, depending
on which device you prefer to use.

To turn the touchpad or optional pointing device on or off:

Click

Start

, then click

Control Panel

. The

Control Panel

window opens. If

your Control Panel is in Category View, click

Printers and Other

Hardware

Click/Double-click the

Mouse

icon. The

Mouse Properties

dialog box

opens.

Summary of Contents for MX6708









































































Search results

Summary of Contents for MX6708

Reviews:

Related manuals for MX6708

Brands by name

Popular brands

Gateway MX6708, Hardware Reference Manual

Search results

Summary of Contents for MX6708

Reviews:

Related manuals for MX6708

Brands by name

Popular brands