Gateway MX6708 Hardware Reference Manual Download Page 12

Page: 12 / 72

CHAPTER 2: Checking Out Your Gateway Notebook

www.gateway.com

Right

Component

Icon

Description

PC Card slot

Insert one Type II PC Card into this slot. For more information, see

“Adding and

removing a PC Card” on page 32

IEEE 1394 port

Plug an IEEE 1394 (also known as Firewire

or i.Link

) device (such as a digital

camcorder) into this 4-pin IEEE 1394 port.

Memory card reader

Insert a memory card from a digital camera, MP3 player, PDA, or cellular
telephone into the memory card reader. For more information, see

“Using the

memory card reader” on page 31

. The memory card reader supports Memory

Stick®, Memory Stick Pro®, MultiMediaCard™, Secure Digital™, Mini Secure
Digital®, and RS-Multimedia Card™ cards.

Note:

RS-Multimedia Card and Mini Secure Digital cards require the use of

an adapter that is available with the media.

USB ports

Plug USB devices (such as a diskette drive, flash drive, printer, scanner,
camera, keyboard, or mouse) into these ports.

Ethernet jack

Plug an Ethernet network cable into this jack. The other end of the cable can
be plugged into a cable modem, DSL modem, or an Ethernet network jack.
For more information, see

“Connecting to a cable or DSL modem or to an

Ethernet network” on page 14

Modem jack

Plug a dial-up modem cable into this jack. For more information, see

“Connecting the dial-up modem” on page 13

USB ports

IEEE 1394 port

PC Card slot

Modem jack

Memory card
reader

Ethernet jack

USB ports

Summary of Contents for MX6708









































































Search results

Summary of Contents for MX6708

Reviews:

Related manuals for MX6708

Brands by name

Popular brands

Gateway MX6708, Hardware Reference Manual

Search results

Summary of Contents for MX6708

Reviews:

Related manuals for MX6708

Brands by name

Popular brands