Gateway MX6650 - Pentium M 1.86 GHz, User Manual

Page: 125 / 144

119 www.gateway.com
Regulatory compliance statements
■ Unplug the notebook from the wall outlet and refer servicing to qualified personnel if:
■ The power cord or plug is damaged.
■ Liquid has been spilled into the notebook.
■ The notebook does not operate properly when the operating instructions are followed.
■ The notebook was dropped or the cabinet is damaged.
■ The notebook performance changes.
Replacement parts and accessories
Use only replacement parts and accessories recommended by Gateway.
Regulatory compliance
statements
Wireless Guidance
Low power, Radio transmitting type devices (radio frequency (RF) wireless communication
devices), may be present (embedded) in your notebook system. These devices may operate
in the 2.4 GHz (i.e. 802.11b/g LAN & Bluetooth), 5.2 GHz (i.e. 802.11a LAN), and
traditional cellular or PCS cellular bands (i.e. Cellular data modem). The following section
is a general overview of considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the
specific country sections (or country group sections). The wireless devices in your system
are only qualified for use in the countries identified by the Radio Approval Marks on the
system rating label. If the country you will be using the wireless device in, is not listed,
please contact your local Radio Approval agency for requirements. Wireless devices are
closely regulated and use may not be allowed.
The power output of the wireless device or devices that may be embedded in your
notebook is well below the RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into your notebook) emit less energy than is allowed in
radio frequency safety standards and recommendations, Gateway believes these devices are
safe for use. Regardless of the power levels, care should be taken to minimize human
contact during normal operation.
Warning Do not use Gateway products in areas classified as
hazardous locations. Such areas include patient care
areas of medical and dental facilities, oxygen-laden
environments, or industrial facilities.
Warning To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.