background image

APPENDIX A: Safety, Regulatory, and Legal Information

www.gateway.com

56

Environmental information

The product you have purchased contains extracted natural resources that have 
been used in the manufacturing process. This product may contain substances 
known to be hazardous to the environment or to human health.

To prevent releases of harmful substances into the environment and to 
maximize the use of our natural resources, Gateway provides the following 
information on how you can responsibly recycle or reuse most of the materials 
in your “end of life” product.

Waste Electrical and Electronic Equipment (commonly known as
WEEE) should never be disposed of in the municipal waste stream
(residential garbage collection). The “Crossed-Out Waste Bin” label
affixed to this product is your reminder to dispose of your “end of life”
product properly.

Substances such as glass, plastics, and certain chemical compounds are highly 
recoverable, recyclable, and reusable. You can do your part for the environment 
by following these simple steps:

When your electrical or electronic equipment is no longer useful to you, 
“take it back” to your local or regional waste collection administration for 
recycling.

In some cases, your “end of life” product may be “traded in” for credit 
towards the purchase of new Gateway equipment. Call Gateway to see if 
this program is available in your area.

If you need further assistance in recycling, reusing, or trading in your “end 
of life” product, you may contact us at the Customer Care number listed 
in your product’s user guide and we will be glad to help you with your 
effort.

Finally, we suggest that you practice other environmentally friendly actions by 
understanding and using the energy-saving features of this product (where 
applicable), recycling the inner and outer packaging (including shipping 
containers) this product was delivered in, and by disposing of or recycling used 
batteries properly.

With your help, we can reduce the amount of natural resources needed to 
produce electrical and electronic equipment, minimize the use of landfills for 
the disposal of “end of life” products, and generally improve our quality of life 
by ensuring that potentially hazardous substances are not released into the 
environment and are disposed of properly.

Summary of Contents for MX6633





































































Reviews: