Gateway MX6452, User Manual

Page: 208 / 262

CHAPTER 14: Troubleshooting
198
3
Click View , then click Resources by type .
Double-click Interrupt request (IRQ) . All
IRQs and their hardware assignments are
displayed.
To free IRQ resources for the new device:
1
In the Device Manager window, check the
device list for a resource conflict. A
resource conflict appears as a black
exclamation point in a yellow circle.
2
Remove the device you are trying to install,
then determine which one of the existing
devices or ports you can disable.
3
Right-click the device or port you want to
disable, then click
Disable . The device or
port is disabled.
Diskette drive
The diskette drive is not recognized
■
Shut down and restart your notebook.
■
The modular drive may not be inserted
completely into the modular bay. Press the
module into the bay, then try to access the
diskette again.
You see an “Access Denied” or “Write
protect” error message
■
Move the write-protection tab in the
upper-right corner of the diskette down
(unprotected).
■
The diskette may be full. Delete
unnecessary files on the diskette and try
again.
■
Not all diskettes are IBM-compatible. Make
sure that the diskette you are using is
IBM-compatible.
■
Try a different diskette. Occasionally
diskettes are flawed and cannot be read by
the diskette drive.