Gateway MX6450 Page 11 Hardware Reference Manual Download

Page: 11 / 86

Identifying features

Left

Ventilation fan

Kensington lock slot

DVD drive

S-Video out jack

Component

Icon

Description

Kensington™
lock slot

Secure your notebook to an object by
connecting a Kensington cable lock to this
slot.

S-Video out
jack (optional)

Plug an S-Video device, such as a television,
into this optional jack. For more information,
see

Viewing the display on a television

in the

User Guide

Ventilation fan

Helps cool internal components.

Warning:

Do not work for long periods with

your notebook resting on your lap. If the air
vents are blocked, your notebook may
become hot enough to harm your skin.

Caution:

Do not block or insert objects into

these slots. If these slots are blocked, your
notebook may overheat resulting in
unexpected shutdown or permanent
damage to your notebook.

Caution:

Provide adequate space around

your notebook so air vents are not
obstructed. Do not use your notebook on a
bed, sofa, rug, or other similar surface.

DVD drive

Insert CDs or DVDs into this drive. For more
information, see

“Using the DVD drive” on

page 29

. To determine the type of drive in

your notebook, examine the drive tray’s
plastic cover and compare the logo to those
listed in

“Identifying drive types” on page 29

Summary of Contents for MX6450























































































Search results

Summary of Contents for MX6450

Reviews:

Related manuals for MX6450

Brands by name

Popular brands

Gateway MX6450, Hardware Reference Manual

Search results

Summary of Contents for MX6450

Reviews:

Related manuals for MX6450

Brands by name

Popular brands