Gateway MX3311, Hardware Reference Manual

Page: 45 / 68

Replacing the hard drive kit www.gateway.com
41
12
Remove the bracket from the old drive.
13
Place the new drive, label side up, onto the bracket so the screw holes line
up.
14
Replace the screws that secure the bracket to the drive.
15
Slide the new hard drive kit into your notebook, then replace the screws
that secure the hard drive kit to the notebook.
16
Insert the battery, then turn your notebook over.
17
Connect the power adapter, modem cable, and network cable
18
Turn on your notebook.
19
For instructions on installing Windows, your drivers, and your applications,
see the “Recovering Your System” chapter you printed in
Step 2 .
20
Reconnect all peripheral devices and replace any Express cards.