Gateway MX3311, Hardware Reference Manual

Page: 41 / 68

Replacing the CD or DVD drive www.gateway.com
37
Replacing the CD or DVD drive
If your CD or DVD drive becomes damaged, you can replace it with a similar drive
obtained from Gateway.
Important
Replace the CD or DVD drive only with a
similar drive provided by Gateway.
Tools Required
You need a small Phillips screwdriver to
replace the CD or DVD drive.
To replace the CD or DVD drive:
1
Make sure that the CD or DVD drive is empty.
2
Follow the guidelines under “Preventing static electricity discharge” on
page 34 .
3
Turn off your notebook.
4
Disconnect the AC adapter, modem cable, and network cable.
5
Disconnect all peripheral devices and remove any Express cards.
6
Turn your notebook over so the bottom is facing up, then remove the
battery. For more information, see
“Changing batteries” on page 30 .
7
With a small Phillips screwdriver, remove the CD or DVD drive screw, then
put it in a safe place.
8
Turn the notebook over so the top is facing up.
Screw