Gateway MT6451, Service Manual

Page: 66 / 78

Replacing Notebook Components
62
Replacing the Bluetooth module
Tools you need to complete this task:
Screws removed during this task:
To replace the Bluetooth module:
1
Complete the steps in “Preparing the notebook” on page 6 .
2
Remove the DVD drive by following the instructions in “Replacing the DVD drive” on
page 11 .
3
If the notebook has IEEE 802.11 wireless networking built in, unplug the antenna cables
from the IEEE 802.11 wireless card by following the instructions in
“Replacing the IEEE
802.11 wireless card” on page 22 .
4
Remove the hard drive kit by following the instructions in “Replacing the hard drive” on
page 26 .
5
Remove the keyboard cover by following the instructions in “Replacing the keyboard cover”
on page 29 .
6
Remove the keyboard by following the instructions in “Replacing the keyboard” on page 31 .
7
Remove the LCD panel by following the instructions in “Replacing the LCD panel assembly”
on page 38 .
8
Remove the palm rest by following the instructions in “Replacing the palm rest” on page 56 .
Flat-blade driver Scribe or non-marring tool - OR -
Phillips #0 screwdriver
1 black (DVD drive)
1-3 black (keyboard)
2 black (keyboard cover)
4 black (LCD panel hinges)
2 black (hard drive kit)
17 black (palm rest - bottom)
4 black (palm rest - top)