Gateway ML6228, Reference Manual

Page: 58 / 134

CHAPTER 5 : Managing Power
52
5
Slide the battery release latch, then slide the battery out
of the notebook.
6
Slide a recharged battery into the notebook until it
snaps into place.
7
Slide the battery lock to the locked position.
8
Turn your notebook over.
9
Open the LCD panel.
Recalibrating the battery
If your notebook unexpectedly goes into Sleep mode while
you are using it but the battery charge is not low, you may
need to recalibrate your battery. You should also recalibrate
the battery periodically to maintain the accuracy of the
battery gauge.
To recalibrate the battery:
1
Connect the AC adapter, then turn on your notebook.
2
As soon as it starts and you see a startup screen, press
F2 . The BIOS Setup utility opens.
3
Open the Advanced menu.
4
Highlight Battery Auto Learning , then select Enabled
by pressing the spacebar.
Important
Do not interrupt the battery recalibration process. If recalibration is
interrupted, you must start the process over again.