Gateway Micro Tower, User Manual

Page: 19 / 332

11
Gateway Mid Tower Back
www.gateway.com
Component Icon Description
System label Includes your computer’s model and serial number. For
more information, see “Identifying your model” on
page 19.
Power connector Plug the power cable into this connector.
Voltage switch Before turning on your computer, make sure that this
switch is in the correct position for the correct power
available. The switch is preset at the factory with the
correct voltage for your area.
In the United States, the utility power is supplied at a
nominal 115 volts at 60 Hz. The power supply should
always be set to this when your computer is operating
in the United States. In other areas of the world, such
as Europe, the utility power is supplied at 230 volts at
50 Hz. If your computer is operating in an environment
such as this, the voltage switch should be moved to 230.
Kensington™ lock slot Secure your computer to an object by connecting a
Kensington cable lock to this slot.
Case cover shipping
screw Remove this screw before opening the case.
Microsoft Certificate of
Authenticity Contains your Windows product key. For more
information, see “Microsoft Certificate of Authenticity” on
page 20.
PS/2 mouse port Plug a Personal System/2
®
(PS/2) mouse into this port.
PS/2 keyboard port Plug a PS/2 keyboard into this port.
USB ports USB 1.1
USB 2.0
Plug USB (Universal Serial Bus) devices (such as a USB
Iomega™ Zip™ drive, printer, scanner, camera,
keyboard, or mouse) into these ports. For more
information, see “Installing a printer, scanner, or other
peripheral device” on page 38.
The rear USB ports may be USB v1.1 or USB v2.0.
Any USB device will work in any USB port.
Serial port Plug a serial device (such as a digital camera) into this
port. For more information, see “Installing a printer,
scanner, or other peripheral device” on page 38.