Gateway M460 User Manual Download Page 36

Page: 36 / 160

www.gateway.com

Status indicators

Status indicators inform you when a drive is being used or when a button
has been pressed that affects how the keyboard is used.

Indicator

Icon

Description

Wireless network (optional)

■

LED on - Wireless radio is turned on.

■

LED off - Wireless radio is turned off.

Caps lock

■

LED on - Caps lock is turned on.

■

LED off - Caps lock is turned off.

Num lock

■

LED on - Numeric keypad is turned on.

■

LED off - Numeric keypad is turned off.

Module

■

Indicator blue- The module is in use.

■

Indicator solid purple - The module is ready
to swap.

■

Indicator flashing purple - The module is not
installed in the notebook.

Hard drive

■

LED blinking - The drive is in use.

■

LED off - The drive is not in use.

Hard drive

Caps lock

Num lock

Wireless network

Module

Summary of Contents for M460

































































































































































Search results

Summary of Contents for M460

Reviews:

Brands by name

Popular brands

Gateway M460, User Manual

Search results

Summary of Contents for M460

Reviews:

Brands by name

Popular brands