6
Replacing Gateway M275 Components
www.gateway.com
Before working with convertible tablet PC components, follow these guidelines:
■
Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
■
Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
■
Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.
Preparing the convertible tablet
PC
To prepare the convertible tablet PC for maintenance:
■
Make sure that the CD or DVD drive is empty.
■
Disconnect all peripheral devices.
■
Remove any memory cards, PC Cards, and diskettes.
■
Turn off the convertible tablet PC and unplug the power cord and modem
and network cables (if attached).
■
Turn over the convertible tablet PC and remove the battery. For more
information see
“Removing the battery” on page 8
Warning
To avoid exposure to dangerous electrical voltages and
moving parts, turn off the convertible tablet PC, remove the
battery, and unplug the power cord and modem and
network cables before opening the case. Replace the
cover before you restore power or reconnect the modem
and network cables.
