Gateway M-7301U Reference Manual Download

Page: 44 / 164

CHAPTER

: Setting Up and Getting Started

Adjusting the volume

You can use the volume control to adjust the overall volume
of your notebook.

To adjust the overall volume level using hardware

controls:

•

If you are using external speakers, turn the knob on the
front of the speakers.

-OR-

Use the mute and volume control buttons on the
keyboard. For more information, see

“System key

combinations” on page 27

-OR-

Click

(

Start

All Programs

Accessories

then click

Windows Mobility Center

. The

Windows Mobility

Center

window opens. Slide the

Volume

control to the

desired volume level.

To adjust the volume from Windows:

Click

(

Volume

) on the taskbar. The volume control

slider opens.

Click and drag the slider up to increase volume and
down to decrease volume.

To mute the volume, click

(

Mute

). To restore volume,

click it again.

Tip

For more information about the Windows Mobility Center, see

“Using the Windows Mobility Center” in your online

User Guide

Summary of Contents for M-7301U





































































































































































Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands

Gateway M-7301U, Reference Manual

Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands