Gateway M-7301U Reference Manual Download

Page: 28 / 164

CHAPTER

: Setting Up and Getting Started

Connecting to a broadband
modem or network

Your notebook has a network jack that you can use to connect
to a cable or DSL modem or to a wired Ethernet network.

To connect to a cable or DSL modem or to a wired

Ethernet network:

Insert one end of the network cable into the network
jack

on your notebook.

Insert the other end of the network cable into a cable
modem, DSL modem, or Ethernet network jack.

Starting your notebook

Tip

For the location of the network jack on an optional port replicator,

see the port replicator user guide.

Warning

Do not work with the notebook resting on your lap. If the air vents are

blocked, the notebook may become hot enough to harm your skin.

Caution

Provide adequate space around your notebook so air vents are not

obstructed. Do not use the notebook on a bed, sofa, rug, or other similar
surface.

Summary of Contents for M-7301U





































































































































































Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands

Gateway M-7301U, Reference Manual

Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands