Gateway M-7301U Reference Manual Download

Page: 14 / 164

CHAPTER

: Checking Out Your Notebook

Front

Component

Icon

Description

Speakers

Provide audio output when headphones or
amplified speakers are not plugged in.

LCD panel release
latch

Slide to open the LCD panel.

Battery charge
indicator

■

LED blue - Battery is fully charged.

■

LED purple - Battery is charging.

■

LED blinking red - Battery charge is very low.

■

LED solid red - Battery is malfunctioning.

Important:

This LED only lights up when your

notebook is connected to AC power or the
battery charge is very low.

Power indicator

■

LED on - Notebook is on.

■

LED blinking - Notebook is in Sleep or Hybrid
Sleep mode.

■

LED off - Notebook is off.

Microphone jack

Plug a microphone into this jack. The built-in
microphone is turned off while an external
microphone is connected.

Headphone jack

Plug amplified speakers or headphones into this
jack. The built-in speakers are turned off when
speakers or headphones are plugged into this
jack.

Microphone jack

Headphone jack

Speaker

Battery charge indicator

LCD panel release latch

Speaker

Power indicator

Summary of Contents for M-7301U





































































































































































Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands

Gateway M-7301U, Reference Manual

Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands