Gateway KAS-303 System Manual Download Page 60

Page: 60 / 122

Chapter 3: Using the Receiver

www.gateway.com

To recall channel levels from memory:

Press the

SETUP

button on the receiver for more than 2 seconds to enter

Setup mode.

While in Setup mode, repeatedly press the

SETUP

button on the receiver

until

P CALL

displays.

While displaying

P CALL

, press the

ADJUST

up and down buttons on the

receiver to select

P CALL

Press the

DECODING

button on the receiver to confirm.

You can also work with channel levels using your remote control and the OSD.
For more information, see “OSD menus and options” on page 66.

Adjusting the LFE level

You can adjust the Low Frequency Effect (LFE) levels in Dolby Digital, DTS, and
MPEG program sources.

To adjust the LFE level:

Press the

SETUP

button on the receiver for more than 2 seconds to enter

Setup mode.

While in Setup mode, repeatedly press the

SETUP

button on the receiver

until

DD L

displays.

While displaying

DD L

, press the

DECODING

button on the receiver to cycle

between the available modes: Dolby Digital LFE (

DD L

), DTS LFE (

DTS L

and MPEG LFE (

MP L

While displaying the LFE mode you want, press the

ADJUST

up and down

buttons on the receiver to adjust the level.

You can also adjust the LFE level using your remote control and the OSD. For
more information, see “OSD menus and options” on page 66.

Summary of Contents for KAS-303



























































































































Search results

Summary of Contents for KAS-303

Reviews:

Related manuals for KAS-303

Brands by name

Popular brands

Gateway KAS-303, System Manual

Search results

Summary of Contents for KAS-303

Reviews:

Related manuals for KAS-303

Brands by name

Popular brands