Gateway GT5042j, Hardware Reference Manual

Page: 32 / 48

Replacing the I/O board www.gateway.com
29
8
Place the heat sink on the system board, then tighten the screws that
secure it to the system board.
9
Replace the fan cover.
10
Return your computer to its upright position.
11
Replace the side panel by following the instructions in “Replacing the side
panel” on page 15 .
Replacing the I/O board
Tips & Tricks
You need a Phillips screwdriver to replace
the I/O board.
To replace the front I/O board:
1
Remove the side panel by following the instructions in “Removing the side
panel” on page 12 .
2
Remove the front bezel by following the instructions in “Removing the
front bezel” on page 14 .
3
Remove the screw that secures the front I/O assembly to the computer,
then remove the I/O assembly.
Screw