Gateway GM5416, Reference Manual

Page: 95 / 132

www.gateway.com
89
•
If your computer is plugged into a surge protector,
make sure that the surge protector is connected
securely to an electrical outlet, turned on, and working
correctly. To test the outlet, plug a working device, such
as a lamp, into the outlet and turn it on.
•
Make sure that the power cord is free from cuts or
damage. Replace any damaged cables.
Printer
The printer will not turn on
•
Make sure that the printer is online. Many printers have
an online/offline button that you may need to press.
•
Make sure that the power cable is plugged into an
AC power source.
The printer is on but will not print
•
Check the cable between the printer and your
computer. Make sure that it is connected to the correct
port.
•
Make sure that the printer is online. Many printers have
an online/offline button that you may need to press so
the printer can start printing. Press the button to put
the printer online.
•
Check the cable for bent or broken pins.
•
If the printer you want to print to is not the default
printer, make sure that you have selected it in the
printer setup.
To set a default printer:
1
Click ( Start ), then click Control Panel . The
Control Panel window opens.
2
Click Hardware and Sound , then click the Change
Default Printer option under the Printers
category. The Printer window opens.
3
Right-click the printer you want to be the default
printer, then click
Set as Default Printer .
•
Reinstall the printer driver. See the guide that came with
your printer for instructions on installing the printer
driver.
8512041.book Page 89 Friday, December 15, 2006 5:08 PM