Gateway FX7026 Reference Manual Download Page 49

Page: 49 / 140

www.gateway.com

Installing memory

When you upgrade the computer memory, make sure that you
install the correct type of memory module for your computer.
Your computer uses DIMM memory.

To install or replace DIMM memory:

Remove the side panel by following the instructions in

“Removing the side panel” on page 37

For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.

Find the memory module banks on your system board.

If you are removing a DIMM from the memory module
bank, gently pull the plastic tabs away from the sides of
the memory module and remove it.

- OR -

If you are adding a DIMM to an empty memory module
bank, gently pull the plastic tabs away from the sides of
the memory module bank.

8512834.book Page 43 Wednesday, November 7, 2007 1:31 PM

Summary of Contents for FX7026













































































































































Search results

Summary of Contents for FX7026

Reviews:

Related manuals for FX7026

Brands by name

Popular brands

Gateway FX7026, Reference Manual

Search results

Summary of Contents for FX7026

Reviews:

Related manuals for FX7026

Brands by name

Popular brands