Gateway FX530QS Reference Manual Download

Page: 78 / 154

: Upgrading Your Computer

Find the memory module banks on your system board.

Gently pull the plastic tabs away from the sides of the
memory modules, then remove them.

Loosen the four screws that secure the heat sink to the
system board, then remove the heat sink. (These screws
cannot be completely removed.)

Disconnect the power and data cables from the system
board, noting their locations and orientation. (You will
reconnect the cables after you install the new board.)

Caution

The heat sink has Thermal Interface Material (TIM) located on the

bottom of it. Use caution when you remove the old heat sink so you
do not damage the TIM.

Screws

8511858.book Page 72 Monday, December 18, 2006 10:51 AM

Summary of Contents for FX530QS



























































































































































Search results

Summary of Contents for FX530QS

Reviews:

Related manuals for FX530QS

Brands by name

Popular brands

Gateway FX530QS, Reference Manual

Search results

Summary of Contents for FX530QS

Reviews:

Related manuals for FX530QS

Brands by name

Popular brands