Gateway FX4710 Reference Manual Download

Page: 34 / 126

CHAPTER 3: Setting Up and Getting Started

Adjusting the volume

You can adjust volume using your speakers’ controls or the
Windows volume controls. You can also adjust the volume of
specific sound devices in your computer.

To adjust the overall volume using hardware controls:

•

If you are using external speakers, turn the knob on the
front of the speakers.
-OR-

Use the mute and volume control buttons on the
keyboard. For more information, see

“Using the

keyboard” on page 19

To adjust the volume from Windows:

Click

(

Volume

) on the taskbar. The volume control

slider opens.

Click and drag the slider up to increase volume and down
to decrease volume.

To mute the volume, click

(

Mute

). To restore volume,

click it again.

8513057.book Page 28 Tuesday, May 6, 2008 9:35 AM

Summary of Contents for FX4710































































































































Search results

Summary of Contents for FX4710

Reviews:

Related manuals for FX4710

Brands by name

Popular brands

Gateway FX4710, Reference Manual

Search results

Summary of Contents for FX4710

Reviews:

Related manuals for FX4710

Brands by name

Popular brands