Gateway FPD1765 - 17" - DVI LCD Monitor, User Manual, Page: 8 / 38

4
www.gateway.com
Using Your Gateway Flat Panel Monitor
Attaching the optional stand
You can buy a fully adjustable stand from www.gateway.com . The stand can be adjusted
for height, tilt, pan angle, and screen rotation.
To attach the height-adjustable stand:
1
Make sure the monitor is turned off.
2
Press the two release buttons on the back of the monitor’s original neck, then slide
the monitor base out of the neck.
3
Place the monitor face-down on a soft, non-marring surface.
4
Remove the screw from the neck hinge, then remove the neck from the LCD panel.
Do not discard the screw.
Screw