Gateway EC1440u Reference Manual Download

Page: 12 / 142

CHAPTER

: Checking Out Your Notebook

Front

Component

Icon

Description

LCD panel release
latch

Press to open the LCD panel.

Speakers

Provide audio output when headphones or
amplified speakers are not plugged in.

Microphone jack

Plug a microphone into this jack.

Headphone jack

Plug amplified speakers or headphones into this
jack. The built-in speakers are turned off when
speakers or headphones are plugged into this
jack.

Power indicator

■

LED on - Notebook is on.

■

LED blinking - Notebook is in Sleep or Hybrid
Sleep mode.

■

LED off - Notebook is off.

Battery charge
indicator

■

LED blue - Battery is fully charged.

■

LED purple - Battery is charging.

■

LED blinking red - Battery charge is very low.

■

LED solid red - Battery is malfunctioning.

Important:

This LED only lights up when your

notebook is connected to AC power or the
battery charge is very low.

Microphone

jack

Headphone

jack

Speaker

Battery

charge

indicator

LCD panel release latch

Speaker

Power

indicator

Summary of Contents for EC1440u















































































































































Search results

Summary of Contents for EC1440u

Reviews:

Related manuals for EC1440u

Brands by name

Popular brands

Gateway EC1440u, Reference Manual

Search results

Summary of Contents for EC1440u

Reviews:

Related manuals for EC1440u

Brands by name

Popular brands