manualshive.com logo in svg

Gateway E-842R, User Manual

Share
Download
Gateway E-842R User Manual Download Page 92

CHAPTER 7: Managing the Storage Solution

www.gateway.com

86

Identifying drive members

You can quickly identify which drives in the enclosure are members of a specific 
array.

On the Main screen, located on the right side of an array name, is an icon (Drive 
Identify icon), that looks like an arrow pointing to the lower left corner. This is 
used to turn on the identify function.

Clicking on the 

Drive Identity

 icon causes all drive members of that array in 

the representation of the enclosure front view to have the 

Drive Identity

 

(arrow) icon displayed on those drives. The icon also appears next to each logical 
drive created from the drives of the array.

You can also identify specific drives in an array by flashing its Drive Status LED. 
For more information, see 

“Locating a drive” on page 94

.

Rebuilding an array

Important

Only one rebuild can take place at a time.

If a rebuild is currently underway, the

second array scheduled for rebuild is

on-hold until the first array has

completed the rebuild.

This option is designed for situations where you want to manually start a rebuild 
operation.

For example, if you inadvertently pulled the wrong drive from a working array 
and that drive is now flagged as a failed drive. If you do not have a hot spare 
defined, the array does not automatically begin a rebuild operation. You must 
change the status of the flagged failed disk drive to a spare drive which clears 
the condition and initiates a rebuild.

Summary of Contents for E-842R





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands