Gateway E-842R, User Manual

Page: 133 / 164

List of events www.gateway.com
127
Array < name> has started
initializing.
Information
[0xB33
(2867)] Initialization has
started. No action necessary.
Array < name> has
completed initializing.
Information
[0xB34
(2868)] Initialization has
completed. No action necessary.
The controller has detected
a data underrun from the
drive w/SN (SAS: w/WWN)
(Slot <
nn >, Enclosure < nn >)
for the SCSI Op Code
0x<
xx >. This is caused by
the controller detecting a
bad CRC in a frame, and
usually indicates a link
problem, either with
cabling or an enclosure.
Error
[0xB3B
(2875) Bus error. Check cabling and
make sure that the disk
drive is correctly
seated in its slot.
An unrecoverable drive
error has occurred as a
result of a command being
issued. This may be due to a
drive error in a non-fault
tolerant array, such as RAID
0, or when the array is
already in a degraded
mode. The controller passes
the status from the drive
back to the host system, to
let the host recovery
mechanisms be used.
Details: Host Loop <
x >, Host
Loop ID < y >, Mapped LUN
Requested < z >, Op Code
< zz >, Sense Data < uu >.
Error
[0xB40
(2880)] Typically due to a
non-recoverable
media error, hardware
error, or loop (bus)
error. No action necessary.
A RAID 5/50 parity check
has started on <
Array
Name >. Type of parity check
= < paritytype >.
Error
[0xB43
(2883)] Parity check started. No action necessary.
A RAID 5/50 parity check
has completed on <
Array
Name >. Type of parity check
= < paritytype >. Error Count
= < zz >.
Error
[0xB44
(2884)] Parity check
completed. No action necessary.
A RAID 5/50 parity check
has been aborted on <
Array
Name >. Type of parity check
= < paritytype >. Error Count
= < zz >.
Error
[0xB45
(2885)] Parity check canceled
by the user. No action necessary.
A drive w/SN (SAS: w/WWN)
(Slot <
nn >, Enclosure < nn >)
has been inserted.
Information
[0xB61
(2913)] Drive was inserted. No action necessary.
Drive & Array Event
Messages
Type [ID] Cause Action