Gateway E-6100 User Manual Download Page 58

Page: 58 / 188

Chapter 4: Using Drives and Multimedia

www.gateway.com

Advanced features

In addition to Nero Express, you can use:

■

Nero BackItUp

to create a backup of files on your hard drive, then use

BackItUp to restore the files you backed up in case of a hard drive failure,
virus, or other problem.

■

Nero CD-DVD Speed

to test your CD and DVD drives for transfer rates,

load and eject times, seek and access times, and more.

■

Nero Cover Designer

to create labels for your CDs and DVDs, covers for

your CD and DVD cases, booklets to include with your CDs and DVDs,
and more.

■

Nero DriveSpeed

to control CD or DVD drive read speed and spin down

time.

■

Nero InfoTool

to find out about your drive capabilities and your computer

configuration.

To use these programs, click

Start

All Programs

Burn a CD or Data DVD

Nero

Programs

, then click the program you want.

For more information, see the online help in the programs and the online user’s
guides. To access the user’s guides, click

Start

All Programs

Burn a CD or Data

DVD

User’s Guides

, then click the guide you want.

Summary of Contents for E-6100





























































































































































































Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands

Gateway E-6100, User Manual

Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands