Gateway E-6100 User Manual Download Page 156

Page: 156 / 188

150

Chapter 9: Troubleshooting

www.gateway.com

To make sure that the printer is not set to work offline in
Windows 2000:

Click

Start

Settings

, then click

Printers

Right-click the name of the printer you want to use. If the menu
shows a check mark next to

Use Printer Offline

, click

Use Printer Offline

to clear the check mark.

■

Wait until files have been printed before sending additional files to the
printer.

■

If you print large files or many files at one time, you may want to add
additional memory to the printer. See the printer documentation for more
information about adding additional memory.

You see a “Printer is out of paper” error message

After adding paper, make sure that the printer is online. Many printers have
an online/offline button that you need to press after adding paper.

Sound

You are not getting sound from the speakers

■

Make sure that the speakers are turned on.

■

Make sure that the volume controls are turned up.

■

Make sure that mute controls are turned off.

■

If you are using external speakers, see the speaker setup poster to check
your speaker connections.

Help and

Support

For more information about sound troubleshooting in
Windows XP, click

Start

, then click

Help and Support

Type the keyword

sound troubleshooter

in the HelpSpot

Search

box

, then click the arrow.

Summary of Contents for E-6100





























































































































































































Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands

Gateway E-6100, User Manual

Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands