Gateway E-5200, User Manual

Page: 15 / 46

6 E-5200 User’s Guide
Setting Up the Operating System
Your computer comes with the Windows NT® 4.0 operating system. The
first time you start your computer, the operating system takes a few minutes
to set up. Refer to your software documentation for specific instructions on
what to do after the system starts.
1.
After the system starts, the Start-up wizard opens. Click
Next
to
continue.
2.
In the dialog box, type your name and company in the appropriate text
boxes. When you have finished entering the information, click
Next .
3.
Continue following the instructions and selecting options in the Start-
up wizard dialog boxes, clicking
Next
to move through the dialog
boxes until the wizard tells you to restart your computer.
Note that almost all the dialog boxes that open in the Start-up wizard
have a button that takes you back to previous dialog boxes in case you
need to change or correct the information you typed.
4.
Restart your system. The setup is complete.
To complete the operating system setup
Note:
As you start Windows NT, if
you are connecting to a
network, have your TCP/IP
(transmission control
protocol/Internet protocol)
information available.