Gateway E-4620, Reference Manual

Page: 22 / 150

CHAPTER 3: Setting Up and Getting Started
16
Connecting a dial-up modem
Your computer may have a 56K modem that you can use with
a standard telephone line to connect to the Internet or fax
documents.
To connect the modem:
1
Insert one end of the modem cable into the modem
jack
at the back of your computer.
2
Insert the other end of the modem cable into a telephone
wall jack. (The modem will not work with digital or PBX
telephone lines.)
3
If you want, connect a telephone to the PHONE jack at
the back of your computer.
Starting your computer
To start your computer:
1
Connect the power, network, mouse, and keyboard
cables to your computer according to the setup poster.
2
Press the power button on the front of your computer.
If your computer does not turn on, check the power
cable connections.
3
If you are starting your computer for the first time,
follow the on-screen instructions to select the language
and time zone and to create your first user account.
4
Attach and turn on any USB or audio peripheral devices,
such as printers, scanners, and speakers. If you need to
attach a peripheral device to the parallel or serial ports,
turn off your computer first. See the documentation that
came with each device for its setup instructions.
Warning
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Important
Your computer has a variable-speed fan, which can run at
different speeds at times to ensure correct system cooling. You may
notice an increase in the fan noise when the fan is running at high speed
and a decrease in the fan noise when it switches to normal speed.
8512733.book Page 16 Friday, September 21, 2007 4:47 PM