Gateway E-3600 System Manual Download

Page: 15 / 158

Gateway Mid-Tower front

Component

Icon

Description

CD/DVD drive

Use a CD drive for installing software programs,
playing audio CDs, and accessing data.

Use a DVD drive for installing software programs,
playing audio CDs and DVDs, and accessing data.

CD/DVD eject button

Press this button to open the CD/DVD drive tray.

Diskette eject button

Press this button to eject an inserted diskette.

Diskette drive

Use this drive to store smaller files on diskettes.

Power button

Press this button to turn the power on or off. You can
also configure the power button to operate in
Standby/Resume mode or Hibernate mode. For more
information on changing power button settings, see
“Power management” on page 81.

USB ports

Plug USB (Universal Serial Bus) devices (such as a
USB Iomega™ Zip™ drive, scanner, or camera) into
these ports.

Summary of Contents for E-3600































































































































































Search results

Summary of Contents for E-3600

Reviews:

Related manuals for E-3600

Brands by name

Popular brands

Gateway E-3600, System Manual

Search results

Summary of Contents for E-3600

Reviews:

Related manuals for E-3600

Brands by name

Popular brands