Gateway E-1500, User Manual, Page: 153 / 204

CHAPTER 13: Adding and Replacing Components www.gateway.com
146
Removing the front bezel
Caution
There are cables connected to the back of
the bezel. When the bezel is loose from
the case:
Carefully set the bezel to the side of the
case with the cables attached.
- OR -
Disconnect the cables from the system
board so you can remove the front bezel
and cables from the computer.
To remove the front bezel:
1
Push out on the plastic retainers that hold the bezel to the front of the
case, then pull the bezel away from the case.
2
Carefully lay the bezel to the side of the case with the cables connected,
or disconnect the cables from the system board and remove the bezel and
cables from the computer.