Gateway DX4710-UB301A - DX - 6 GB RAM, Reference Manual

Page: 102 / 136

CHAPTER 7: Troubleshooting
96
Memory
You see a “Memory error” message
•
Run the Memory Diagnostic Tool. Click ( Start ), type
Memory Diagnostic Tool, then press E
NTER
. Click
Restart now and check for problems . Your computer
restarts and runs the memory diagnostics.
You see a “Not enough memory” error message
•
Close all programs, then restart your computer.
•
If you continue to receive this error message, consider
adding more memory to your computer.
Audio
You are not getting sound from the speakers
•
Make sure that the volume controls are turned up and
not muted. For more information, see
“Adjusting the
volume” on page 31 .
•
If you are using external speakers:
•
Make sure that the speakers are turned on, and check
the speaker connections. See your speakers’ user
guide for more troubleshooting tips.
•
Make sure that your computer’s universal audio jacks
are configured correctly. For more information, see
“Configuring the audio jacks” on page 33 .
•
If you are trying to play an audio disc, see “Optical discs”
on page 91 .
Help
For more information about troubleshooting memory errors, click Start ,
then click Help and Support . Type
memory error
in the Search Help box,
then press E
NTER
.
Help
For more information about sound troubleshooting, click Start , then click
Help and Support . Type sound troubleshooter in the Search Help box,
then press E
NTER
.
8513217.book Page 96 Wednesday, August 27, 2008 3:30 PM