Gateway DX440X Reference Manual Download Page 46

Page: 46 / 140

Replacing the side panel

To replace the side panel:

Make sure that all of the internal cables are arranged
inside the computer so they will not be pinched when
you close the computer.

Slide the side panel toward the front of the computer
until the back of the side panel is flush with the back of
the computer.

Tighten the two thumbscrews on the back edge of the
side panel, then reconnect the cables and power cord.

Replacing the color panel

To replace the color panel on the front bezel:

Find the panel release lever inside the front bezel’s lower
vent opening, then slide the lever to the left.

Tip

If you have difficulty removing the color panel, it may be easier

to remove the front bezel first. (This procedure shows the bezel removed.)
To remove the front bezel, follow the instructions in

“Removing the front

bezel” on page 35

8512418.book Page 38 Friday, May 11, 2007 11:44 AM

Summary of Contents for DX440X













































































































































Search results

Summary of Contents for DX440X

Reviews:

Related manuals for DX440X

Brands by name

Popular brands

Gateway DX440X, Reference Manual

Search results

Summary of Contents for DX440X

Reviews:

Related manuals for DX440X

Brands by name

Popular brands