28
Chapter 4: Installing the New Drive
www.gateway.com
Connecting the drive cables
To connect the drive cables:
1
Connect an unused four-color power cable to the power supply connector
on each drive. The power supply connector varies between drive types.
If the drive uses a Serial ATA power cable, you may need to connect the
standard power cable to the end of the Serial ATA cable to complete the
power connection.
If you do not have enough power connectors, place the Y-adapter power
cable that came with the new drive on the end of the existing power cable
to make two power connectors.
Standard
power cable
Serial ATA
power cable