Gateway Desktops, User Manual

Page: 148 / 198

CHAPTER 13: Adding and Replacing Components www.gateway.com
140
Closing the case
Replacing the front bezel
To replace the front bezel:
1
Insert the tabs on the left side of the bezel into the slots in the left side
of the computer.
2
Swing the right side of the bezel in to insert the tabs on the right side of
the bezel into the slots on the right side of the computer.
3
Press the right side of the bezel firmly until it snaps into place.
Replacing the side panel
To replace the side panel:
1
Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
2
Insert the panel tabs into the front of the case, then swing the side panel
toward the back of the computer to secure it into place.
3
Replace the side panel thumbscrews.
4
Reconnect the cables and power cord.
8511629.book Page 140 Wednesday, July 19, 2006 9:38 AM