Gateway Convertible notebook, Service Manual

Page: 32 / 74

Replacing convertible notebook components
28
Replacing the keyboard
Tools you need to complete this task:
v
Screws removed during this task:
To replace the keyboard:
1
Complete the steps in “Preparing the convertible notebook” on page 5 .
2
Remove the two bottom keyboard screws.
3
Remove the keyboard cover by following the steps in “Replacing the keyboard cover” on
page 27 .
Tip
The screw holes are marked with a K.
Flat-blade driver Scribe or non-marring tool - OR -
Phillips #0 screwdriver
2 black 2.5*8.0
(Keyboard)
Screw
Screw