Gateway Computer, Reference Manual

Page: 90 / 126

CHAPTER 6: Troubleshooting
84
To check the dialing properties:
1
Click Start , then click Control Panel . The Control
Panel window opens. If your Control Panel is in
Category View, click Printers and Other Hardware .
2
Click/Double-click the Phone and Modem Options
icon, then click the Dialing Rules tab.
3
Click the location from which you are dialing, then
click
Edit .
4
Make sure that all settings are correct.
•
Disconnect any answering machine, fax machine, or
printer that is on the same line as the modem. Do not
connect these devices to the same telephone line as the
modem.
•
Make sure that you are not using a digital, rollover, or
PBX line. These lines do not work with your modem.
•
Check for line noise (scratchy, crackling, or popping
sounds). Line noise is a common problem that can cause
the modem to connect at a slower rate, abort
downloads, or even disconnect. The faster the modem,
the less line noise it can tolerate and still work correctly.
Listen to the line using your telephone. Dial a single
number (such as 1). When the dial tone stops, listen for
line noise. Wiggle the modem cable to see if that makes
a difference. Make sure that the connectors are free from
corrosion and all screws in the telephone wall jack are
secure.
You can also call your telephone service and have the
telephone line checked for noise or low line levels.
•
Try another telephone line (either a different telephone
number in your house or a telephone line at a different
location). If you can connect on this line, call your
telephone service.
•
Try connecting with the modem at a lower connection
speed. If reducing the connect speed lets you connect,
call your telephone service. The telephone line may be
too noisy.
You cannot connect to the Internet
•
Review the troubleshooting information under
“Internet” on page 80 .
8512980.book Page 84 Thursday, March 6, 2008 1:30 PM