Gateway AR-230, User Manual

Page: 32 / 68

28
Chapter 3: Using Your DVD Recorder
www.gateway.com
Setting the date and time
If you plan to use the
Timed Recording
feature to schedule the recording of a
TV program, you need to set your DVD recorder’s date and time.
To set the date and time:
1
Press the
Power
button to turn on your DVD recorder.
2
Press the
Setup
button to open the Setup menu.
3
Press the or button to select
System
, then press the
Enter
button.
4
Press the or button to select
Date
, then press the
Enter
button.
5
Press a number button or the or button to enter a digit, then press
the button to go to the next digit. If you need to change a digit, press
the button to go back.
6
Press the
Enter
button to confirm the date.
7
Press the or button to select
Time
, then press the
Enter
button.
8
Press a number button or the or button to enter a digit, then press
the button to go to the next digit. If you need to change a digit, press
the button to go back.
9
Press the
Enter
button to confirm the time.
10
Press the
Setup
button to close the Setup menu.