Gateway ALR 7300, User Manual

Page: 20 / 50

10 Gateway ALR 7300 User’s Guide
•
Six 3.5-inch drive bays: two external bays, one of which has a
factory-installed, 1.44-MB 3.5-inch diskette drive and two internal
bays designed to support 3.5-inch hard drives. Two 3.5-inch
internal drive bays mounted beneath the power supply which
support a factory-installed hard drive.
Buttons
There are three buttons on the front panel. These buttons are defined in the
following table.
LED indicators
There are five LEDs on the front panel. These LEDs are defined in the
following table.
Button Function
Power button Toggles the system ON or OFF.
Reset button Allows you to reset the system without having to power
it off and then on again
Keyboard
lock/ECC
clear button Enables or disables the keyboard function and clears
the error flag after an ECC error. Pressing this button
does not correct the error condition. If the error condi-
tion has not been corrected, the LED will light again.
LED Meaning When Lit
Power The system is on
Hard disk controller
activity The hard disk is being
accessed
P1 activity The first processor is active
P2 activity The second processor is
active
ECC fault A memory error has been
detected
4074.book Page 10 Thursday, April 1, 1999 2:56 PM