Gateway ALR 7300, User Manual

Page: 18 / 50

8 Gateway ALR 7300 User’s Guide
Basic features
•
Intel Pentium
®
II Xeon
™
processor (speed and cache size depends
on the model)
•
SMP design supporting up to two processor modules; Intel MP
Specification V1.1 and 1.4 compliant
•
32-bit PCI and 16-bit ISA bus master
•
64-bit processor and memory data path
•
Extended PCI-to-PCI bridge support
•
64-MB error checking and correcting (ECC) synchronous
dynamic random access memory (SDRAM), expandable to 2-GB
using 100 MHz ECC SDRAM dual in line memory modules
(DIMMs)
•
Integrated 2-MB DRAM PCI Graphics (Cirrus Logic GD54M30)
•
Seven expansion slots: six PCI and one shared PCI/ISA.
•
Integrated dual channel PCI Ultra2 SCSI (Adaptec 7890) with two
68-pin connectors, dual-channel Ultra-DMA PCI IDE interface,
and diskette controller supporting 1.44-MB and 2.88-MB formats.
•
RAIDport ready: the shared PCI/RAIDport slot supports the
addition of a RAIDport card to provide RAID capability.
•
Low voltage differential (LVD) support for SCSI devices. LVD
SCSI allows faster disk access and greater data integrity
•
Power supply that provides 300-W of DC power to internal system
components.
•
Phoenix upgradable Flash BIOS, Year 2000 Ready
•
The system is equipped with InforManager
™
(IFM), a special
feature consisting of both hardware and software designed to
monitor and report the operating status of the system and its
devices: processors, power supplies, memory, ambient
temperatures, voltages, and fan operation. For further information
about the InforManager, refer to the
InforManager
™
User’s Guide.
4074.book Page 8 Thursday, April 1, 1999 2:56 PM